Mercedes-Benz 190 E 2.3-16 201 1987, Руководство пользователя

Страница: 53 / 113

Tuning sensitivity button
By pressing the tuning sensitivity button
a
once or twice, you can select the
desired sensitivity level of the automatic station seeker. The sensitivity indicator
shows the selected sensitivity level:
i = least sensitive (the automatic seeker only stops at strong stations)
f = average (the automatic seeker stops at strong and moderate strength
stations)
f = most sensitive (the automatic seeker also stops at weak stations)
When switched off, the radio returns to the “ least sensitive” level.
Direct frequency tuning
In order to select a station with a known frequency, select the wave band (AM or
FM), press the function control button
and then enter the frequency by
pressing the corresponding pushbuttons.
Example: FM 98.5 MHz AM 1050 kHz
Press any button marked
DZ3
through
QZ3 till
through
tlU
Press the function control button
D D
Enter frequency by pressing
0221 limj Q223 Q2] 2Q2I 0U
When tuning a frequency directly, the number of the pushbutton is not displayed on
the panel. The wave band is indicated by showing “ MFIz” for FM or “kFIz” for AM.
Note:
All AM stations have allocated frequencies ending with a “0” .
All FM stations have allocated frequencies ending with an odd (uneven) digit
after the decimal point.
Broadcasters sometimes may not give their exact frequency but the next closest
whole number.
US radio frequency ranges:
AM 5 4 0 -1 6 0 0 kHz
FM 88.1 - 107.9 MHz
Manual tuning (used to fine tune a
station or for manual scanning)
After selecting the desired AM or FM
wave band, press the manual tuning
button D
(decreasing station fre­
quency) or Q (increasing station fre­
quency).
The frequency will increase or decrease
respectively in increments of 0.1 MHz
for FM or 1.0 kHz for AM. Release the
button when the desired station is tuned
in.
Please note: It is recommended that
manual tuning operations be performed
by the driver while the vehicle is not in
motion.
Pushbutton tuning
Six FM stations and four AM stations
can be stored in memory and recalled
by pressing the appropriate buttons
marked Q£
j
through QJ3 for FM
or through [JQ for AM stations.
To store stations in memory
Any FM station can be stored on any
button marked nJ3through0JJ| by first
tuning in the desired station, depressing
the button desired and holding it until
the display has changed from the “old”
setting to a “ blank” and then to the new
station to be stored.
51