Mercedes-Benz 190 E 2.3-16 201 1987, Руководство пользователя

Страница: 52 / 113

To adjust the tone characteristic
To select AM or FM
Base and treble can be adjusted independently.
To set the radio to a “flat” tone setting (bass and treble at mid-range setting),
briefly press both tone c o n t r o l s Q D I simultaneously.
Upon pressing either tone button, the tone level for that function (either bass Q |
or tr e b le B |) will begin increasing. It stops increasing when the button is
released or when the maximum tone level is reached (approx. 2.5 seconds).
After reaching the maximum tone level, the tone control will stay at that level
unless the tone button is released and pressed again, at which point the tone level
will start decreasing. It will stop decreasing when the button is released or when
the minimum tone level is reached (approx. 5 seconds).
After reaching the minimum tone level, the tone control will stay at that level
unless the tone button is released and pressed again. After pressing the tone
button again the tone level will begin to increase and the cycle is repeated.
Adjustments made to the tone characteristics can be observed on the tone setting
indicator in the display.
Note: It takes approx. 5 seconds to go from minimum tone level to maximum tone
level.
Press anyof the buttons marked QJ3
throughQEl to tune the radio to the FM
band.
Press anyof the buttons marked EEI
through QUJ to tune the radio to the AM
band.
The selected wave band is shown in the
digital display.
To tune in a station
Stations can be tuned in by using auto­
matic seek, direct frequency tuning,
manual tuning, or by preset pushbuttons.
The frequency of the station selected is
indicated on the digital display.
Automatic station seeker
Switch to the wave band desired by
pressing any of the following buttons:
for FM, buttons through
for AM, buttons m 3 through y 0 .
By pressing the automatic station seeker
bar
u
pward the radio wi 11 seek
stations in ascending frequencies, by
pressing down it will do so in descending
frequencies. The direction of automatic
seeking can be reversed by pressing the
b a r ^ S B f f li n the respective direction.
In order to arrive at a desired station
without stopping, the bar must be held in
the desired direction.
50