Mercedes-Benz 176.012, Руководство пользователя

Страница: 374 / 417

Covers, front (example: vehicles with AMG equip-
ment)
X
Mercedes-AMG vehicles and vehicles
with AMG equipment: fold cover =
upwards.
X
Take ratchet ring spanner B out of the
vehicle tool kit and place it on the hexagon
nut of jack A so that the letters AUF are
visible.
X
Position jack A at jacking point ? .
X
Make sure that the base of the jack is posi-
tioned vertically under the jacking point.
X
Turn ratchet ring spanner B until jack A
sits completely on jacking point ? and the
base of the jack lies evenly on the ground.
X
Turn ratchet ring spanner B until the tyre
is raised a maximum of 3 cm from the
ground.
Removing a wheel
!
Do not place wheel bolts in sand or dirt.
The threads of the wheel bolts and wheel
hubs could otherwise be damaged when
the bolts are tightened.
X
Unscrew the wheel bolts.
X
Remove the wheel.
Fitting a new wheel
G
WARNING
Oiled or greased wheel bolts or damaged
wheel bolts/hub threads can cause the wheel
bolts to come loose. As a result, you could
lose a wheel while driving. There is a risk of
accident.
Never oil or grease wheel bolts. In the event of
damage to the threads, contact a qualified
specialist workshop immediately. Have the
damaged wheel bolts or hub threads
replaced/renewed. Do not continue driving.
G
WARNING
If you tighten the wheel bolts or wheel nuts
when the vehicle is raised, the jack could tip
over. There is a risk of injury.
Only tighten the wheel bolts or wheel nuts
when the vehicle is on the ground.
Observe the instructions and safety notes on
"Changing a wheel" (
Y
page 367).
Only use wheel bolts that have been designed
for the wheel and the vehicle. For safety rea-
sons, Mercedes-Benz recommends that you
only use wheel bolts which have been
approved for Mercedes-Benz vehicles and the
respective wheel.
Changing a wheel
371
Wh
eels
and
ty
res
Z