Mercedes-Benz 176.012, Руководство пользователя

Страница: 180 / 417

R
as a result of the later automatic transmis-
sion shift points, the fuel consumption pos-
sibly being higher.
R
the suspension exhibits particularly stiff
springing and damping settings (vehicles
with AIR RIDE CONTROL).
R
gliding mode is not available.
R
the ECO start/stop function is not availa-
ble.
Manual gearshifting
General notes
You can change gear yourself using the steer-
ing wheel gearshift paddles. The transmission
must be in position D.
Depending on which gearshift paddle is
pulled, the automatic transmission immedi-
ately shifts into the next gear up or down, if
permitted.
Mercedes-AMG vehicles: to use manual
shifting, you have two options:
R
temporary setting
R
permanent setting
If you activate manual gearshifting, the mul-
tifunction display will show the current gear
instead of transmission position D.
If manual gearshifting is deactivated, the
gears will be selected automatically.
Temporary setting
X
To activate: shift the DIRECT SELECT lever
to position D.
X
Pull steering wheel gearshift paddle :
or ; .
Temporary setting will be active for a certain
amount of time. Under certain conditions the
minimum amount of time is extended, e.g. in
the case of lateral acceleration, during an
overrun phase or when driving on steep ter-
rain.
X
To deactivate: pull steering wheel gear-
shift paddle ; and hold it in place.
or
X
Use the DIRECT SELECT lever to shift the
transmission position.
or
X
All vehicles (except Mercedes-AMG vehi-
cles): use the DYNAMIC SELECT button to
change the drive program.
Mercedes-AMG vehicles: use the DYNAMIC
SELECT controller to change the drive pro-
gram.
Permanent setting (Mercedes-AMG
vehicles)
X
To activate: shift the selector lever to posi-
tion D.
X
Press button : .
X
To deactivate: press button : .
or
X
If position D (automatic transmission) is
selected for the transmission in drive pro-
Automatic transmission
177
Driv
ing
and
pa
rk
ing
Z