C-03
Insert the water tank
suction pipe into the
water inlet of the water
tank according to the
direction shown in the
figure
。
After the water tank suction
pipe connector is buckled to
the water suction pipe
connector, screw the screw
cap into the water inlet valve
interface according to the
direction shown in the figure,
otherwise the interface may
seep
。
After the water tank
is placed horizontally
on the table top, lift
the machine and put
it down at the groove
of the water tank。
A
B
C
Use of water tank
After pulling out the water drawer of the water tank, pour the water in the kettle.
Pay attention not to pour water too fast to prevent water splashing
。
In the process of adding water, when the " " lights up on the display screen
with beeping sound, it indicates that the water tank is full of water. At this time,
please stop adding water and push the water drawer back to the water tank, and
then press the power button to start the machine。
A
B
Turncap
water
tank suction
pipe connector
suction
pipe
connector
Note: before adding water to the water tank, please check whether the power supply
of the machine is connected; whether the drain pipe and water suction pipe of the
water tank are connected properly。
Water tank Installation
Water tank
Suction pipe
The full water icon can only be illuminated when it is normally powered on!
After the full water icon is on, please do not continue to add water, which will
exceed the capacity of the water tank and cause overflow。
Please clean the water tank every month。
Please pour out the residual water in the water tank，if the water tank will not
be used for a long time.
Wraning
!
!
