2
BEFORE YOU START
UNPACKING THE BIKE
Make sure the fork is in the correct position before mounting the handlebar and
wheel (fork arch should be facing forward ):
3
INSTALLING THE HANDLEBARS
Remove the 4 screws on the stem, take off the
stem plate, mount the handlebar to the stem
(make sure all the cables are put properlly),
hand tighten the bolts to secure the faceplate,
STEP
STEP
Center the bar, use the white mark as a guide.
Ensure there is an equal amount of mark on
both sides of the stem, Once centered, use
your Allen wrench to slightly tighten the
faceplate down.
THE FORK MUST BE PUT IN CORRECT POSITION
The fork arch should be facing forward before
assemble the handlebar.
E
V RY IMPORTANT
