TROUBLESHOOTING
25
Problem
Possible Solution
Turn the knob clockwise to increase resistance and counterclockwise to
decrease resistance. The resistance of the bicycle is adjustable with
infinitely variable speed and multiple gears.
How to adjust gear?
What to do when the
handle shakes slightly?
Check whether the connecting screws of the handle and the front
column tube are firmly fixed.
Check if the retaining knob is locked.
What to do when the
machine shakes
during use?
Check whether the front and rear foot tubes are fastened enough.
What to do when
pedals loose?
Following the setup instruction, to check whether the left and right
pedals are locked on the first step. (see p11)
Following the setup instruction, to check whether the inner fixing nut
of the second stage of setting up the pedal is locked. (see p11)
Why there is abnormal
noise when riding with
maximum resistance?
When riding with maximum resistance, the contact between the brake
block and the wheel will produce abnormal noise. Turn the resistance
knob one or two turns counterclockwise will eliminate the abnormal
noise. Our engineers would not recommend customers to use the
bike at maximum resistance for a long time.
What to do when the
whole machine is
slightly tilted?
Check whether the four adjusting foot pads at the bottom of the front
and rear foot tubes are on the same plane.
Adjust and rotate the raised foot pads parallel to the floor.
