Mepu EKI 125, Инструкция по установке и эксплуатации

Страница: 5 / 12

1.6.2012
Ver. 1.0
4
Eki 30 – 125
Before use, approval must
be obtained from the fire
authority.
1.3. Starting
To start the burner, turn the switch to the position “Burner”. Once the furnace temperature has
reached approx. 40ºC, the fan will start. Adjust the room thermostat to a temperature of your
choice. Check that there are no fire hazard objects in close proximity to the device. When the
switch is in the position “Fan”, only the heater’s fan is constantly in operation.
1.4. Stopping
Turn the switch to the position “Off”. The oil burner will stop and the fan will keep operating
until the furnace temperature drops to below 40ºC.
1.5. Malfunction
Try troubleshooting according to the burner’s user manual, or call your nearest Oilon
maintenance company.
1.6. The location of the devices
Using a fixed heater in a non-fire hazard or non-explosive room
It is usually possible to position a heater in the same room that it heats.
Cold air can be taken from this room. The combustion air can also be taken from the room, if
there is a sufficient supply of combustion air. Otherwise, the combustion air must be taken
from the outside.
In the public rooms of apartment buildings, the heater must usually be positioned in a heater
room compatible with a boiler room.
The same heater cannot be used to heat more than one residential apartment.
In a residential apartment, the heater can be positioned in a room as well, if it has been
deemed suitable for this purpose in the prior approval.
Using a fixed heater in rooms with fire hazard