2
OPERATING INSTRUCTIONS
2 - 23
2 - 11 LOWERING THE ARM WHEN THE ENGINE IS OFF
Proceed as follows if you need to lower the arm with the engine off or in
case of hydraulics malfunction.
1) Remove the rubber carpet (1) and
the cover beneath it;
2) Slacken off locknut (2), then use a
wrench to gradually undo screw (3)
until the arm starts to lower itself
slowly to the ground. Allow the arm
to lower completely to the ground;
3) Now tighten screw (3) fully down.
Tighten down locknut (2).
Troubleshoot the malfunction. Run the
necessary repair and restore the machine to service.
2 - 12 TOWING
If the machine gets stuck in soft ground and cannot
extract itself, use the towhook on the rear axle to tow it.
Use a rope with load rating of at least 4000 kg.
1
3
2
Cavo di traino
Gancio di traino
Tow hook
Tow rope
•
I
F YOU SWITCH OFF THE ENGINE OR EXPERIENCE A HYDRAULICS MALFUNCTION WITH THE ARM RAISED
,
SAFE THE MACHINE BY LOWERING THE ARM TO THE GROUND
.
•
M
AKE SURE THE AREA IS CLEAR BEFORE LOWERING THE ARM MANUALLY
.
•
C
LEAR THE AREA OF ACTION OF THE ARM OF UNAUTHORIZED PERSONS
.
WARNING
•
N
OT TOWING THE MACHINE CORRECTLY CAN LEAD TO ACCIDENTS AND DEATH
.
•
T
HE CORRECT TOWING PROCEDURE IS GIVEN BELOW
.
•
D
O NOT ALLOW ANYONE TO STAND BETWEEN THE TWO MACHINES WHEN TOWING IS IN PROGGRESS
.
•
S
UDDEN MOVEMENTS CAN OVERLOAD THE TWO ROPE AND CREATE OVERPRESSURES RESULTING IN
BREAKAGE
. M
OVE SLOWLY AND SMOOTHLY
•
M
AKE SURE THAT THE TOW IS STRAIGHT AWAY FROM THE HOOK
,
NOT TO THE SIDE
.
•
T
OWING THE MACHINE SIDEWAYS CAN CAUSE THE HOOK MAY FAIL AND CAUSE DAMAGE OR INJURY
.
DANGER
Содержание IHI 12VXE
Страница 2: ... ...