Menzi Muck IHI 12VXE Скачать руководство пользователя

Страница: 35 / 74

SAFETY MEASURES

1 - 23

TAKE

GREAT

CARE

WHEN

DRIVING ON SLOPES.

When moving on slopes, keep the bucket at 200 to 300
mm (A) off the ground. If the machine starts to slip or tip
over, immediately lower the bucket and stop the
machine.
DO NOT DRIVE IN REVERSE.

When driving uphill, always keep the arm on the
upwards side of the machine.

NEVER STEER ON SLOPES

NEVER STEER

on sloping or unstable ground; doing so

can tip the machine over.

NEVER

drive across slopes. When working on sloping

ground, always drive the machine in line with the slope
(up or down the slope). Take great care when driving on
icy ground as the machine may slip.

ALWAYS CHECK THAT BRIDGES

ARE SAFE TO DRIVE OVER

Always check that capacity of every bridge you
encounter is sufficient to support the weight of the
machine.

Wrong!

Right!

Содержание IHI 12VXE











































































Результаты поиска

Содержание IHI 12VXE

Отзывы:

Похожие инструкции для IHI 12VXE

Бренды по названию

Популярные бренды

Menzi Muck IHI 12VXE, Руководство оператора

Результаты поиска

Содержание IHI 12VXE

Отзывы:

Похожие инструкции для IHI 12VXE

Бренды по названию

Популярные бренды