Menuett 002202, Руководство по эксплуатации

Страница: 20 / 20

EN
20
DESCRIPTION
1. Holder for nozzle
2. Power switch
3. Indicator for full bag
4. Control of suction power
5. Cord rewind
FIG. 1
USE
Before use
NOTE:
Always pull out the plug before changing
accessories.
1. Open the cover and insert a dust bag.
FIG. 2
2. Push the suction hose into the intake
opening until it clicks into place.
3. Connect the metal tube to the curved end
of the hose.
4. Fit the floor nozzle on the tube. Press the
tube firmly into the floor nozzle. Adjust the
tube to the required length.
Using the vacuum cleaner
1. Pull out the power cord to the required
length and then plug in the plug. A yellow
mark on the power cord shows a suitable
extension length. Do not pull out the power
cord more than to the red mark.
2. Plug in the plug.
3. Start the appliance by pressing the power
switch.
4. Adjust the suction power with the control
on the vacuum cleaner.
5. Switch off the vacuum cleaner with the
power switch when you have finished
vacuuming.
6. Wind in the power cord by pressing the
rewind button. Always hold on to the plug
when winding in the power cord.
Overheating protection
The vacuum cleaner is fitted with overheating
protection, which switches off the vacuum
cleaner in the event of overheating. If the
vacuum cleaner switches off as a result of
overheating, pull out the plug, put the power
switch in the OFF position, replace the dust bag
and clean the filter. Allow the vacuum cleaner
to cool for about 1 hour. To start the vacuum
cleaner again, set the power switch to ON.
MAINTENANCE
Air outlet filter
The filter will eventually become dusty. This is
quite normal and will not affect its function.
1. Release the outlet grille over the filter by
lifting its back edge.
2. Take out the filter.
FIG. 3
3. Wash the filter under running water.
4. Allow the filter to dry in the air for at least
24 hours at room temperature before
putting it back in the vacuum cleaner.
5. Replace the outlet grille over the filter.
6. Do not expose the filter to heat. Clean the
filter every six months, or if the suction
power deteriorates.
Motor filter
The motor filter is located in the space behind
the dust bag. Remove the filter and wash under
running water at regular intervals. Leave it to dry
at room temperature before use. Do not expose
the filter to heat.