Menuett 002-348, Руководство по эксплуатации

Страница: 16 / 16

EN
16
2. Press the power switch on the handheld
unit to start it and press it again to switch
it off.
3. If you need to use the brush, this is
attached to the suction nozzle. Now start
the handheld unit again. The same applies
to the flat suction nozzle.
FIG. 3
FIG. 4
Charging
1. Connect the mains adapter to the
connector on the side of the charger.
2. Insert the plug on the mains adapter into a
power outlet.
3. Place the vacuum cleaner in the charger.
Ensure that the vacuum cleaner hooks
correctly into the charger.
4. The charging indicators come on. The
charging indicators go out when the
vacuum cleaner is fully charged.
NOTE:
The vacuum cleaner must not be started
during charging.
MAINTENANCE
1. Loosen the vacuum cleaner from the
handheld unit by pressing the release
buttons on the right and left-hand side of
the vacuum cleaner, so that it releases from
the handheld unit.
FIG. 5
2. Grip the filter handle and lift out the filter
unit from the vacuum cleaner. Empty the
dust collector and rinse with water. Let the
dust collector dry.
3. Grip the filter handle and turn it clockwise
to loosen the HEPA filter. Empty the filter
cover and rinse with water. Let the filter
cover dry.
4. Clean the HEPA filter with water when the
appliance does not work correctly. Allow to
dry completely after cleaning.
5. When the dust collector has been cleaned,
first refit the HEPA filter in the filter cover
and then refit the unit on the dust collector.
Refit the dust collector in the handheld unit.
6. If there is air on the floor nozzle’s roller,
press the release button to loosen the
roller.
FIG. 6
FIG. 7
7. Clean the roller.
8. Refit the roller in the nozzle and ensure fits
correctly.
NOTE:
• The dust collector does not need to be
cleaned after each use.
• If the HEPA filter becomes clogged with
dust, clean and replace it in time.
• Hair can fasten in the roller. Clean in time so
that the vacuum cleaner works efficiently.