mensor DPG 2400, Руководство по эксплуатации

Страница: 22 / 36

22 Operating Instructions DPG 2400 Series
Digital Pressure Gauge
DPG 2400 Series
6.3.4 Pressure Units Screens
Pressure units must not be changed when using the null feature.
There are three screens that allow selection of the most common pressure units:
PSI InHg 0c
InHg 60f InH20 4c
InH20 20c mBAR
BAR more
mmHg 0c cmHg 0c
Pa hPa
kPa MPa
kg/cm^2 more
cmH20 4c cmH20 20c
MSW User
Set User more
The pressure unit of the sensor is selected by highlighting the desired unit and
pressing the
♦
(enter) key. To advance to the next units screen, select “more”. The last
units screen allows selection and entry of a special “User” unit. The User unit has a
configurable conversion factor that converts from PSI to the desired value. To enter the
conversion factor, select “Set User” on the last units screen to display:
Set User Units A
+1.1
Enter to Continue
Use the left and right arrow keys to move the cursor under the digit to change and use
the up and down arrow keys to increment or decrement the digit. The conversion factor
can be set from -1.6 to -1.00000e-6 and +1.00000e-6 to +1.6. Press
the
♦
(enter) key to store the conversion factor. To apply the “user” conversion factor,
the units “User” must be selected.
For the remote programmable pressure units list and information, see
Section 7.2.6, User Programmable Pressure Units.