:
Two person assembly recommended
Assembly Instructions
a. Attach the Weight Stack Cover (
21
) to the Weight Stack Cover Support (
5
) using 6 × M10×16mm Allen
Bolts (
60
) and 6 × Ø10mm Washers (
69
).
b. Connect the Single Strap (
57
) and Pull Bar (
24
) to the cable using 7# Carabiner (
72
) and 15 Link
Chain (
71
).
c. Loosen the M10 Aircraft Nut (
70
) before you connect the 15 Link Chain (
71
) with the U-shaped
connector (
52
), and then secure it.
d. If you also buy the 4594828 Dumbbell Bench, connect it with the MH Cable Cross Over using 120×45
Bracket (
28
) and 2 x Lock Knobs (
37
).
Notes
:
part (
55
) and (
56
) are pre-assembled. If you want to exercise with the Lat bar (
13
),
Saddle-Shaped Strap (
23
) and Tricep Rope (
59
), just replace the Pull bar (
24
).
Step 12
23