Maintenance and cleaning
Disconnect the plug from the socket before cleaning or
when not in use for prolonged periods.
- When cleaning, do not spray cleaners or water directly
into
the product.
- Apply the cleaner on a rag and wipe the product.
- Regular maintenance of the product is recommenced, as
this will prolong the table’s service life and appearance.
- It is advised to regularly clean / polish the aluminum foot:
Painted foot: Polish the foot for example with auto polish
Chrome foot: Use a good oil, and put a little on a cloth and
wipe the chrome parts of the product. Then polish with a
dry cloth.
- Check that the cord is not damaged and that the plugs are
clean.
Troubleshooting
Follow the troubleshooting steps listed below:
- Make sure the power cord
and serial connector cord
is
connected correctly.
- Check the cable for any ruptures.
- Make sure the On/Off switch has been pressed.
- Check if the bulb is broken.
Please contact the place of purchase if this did not solve
your problem.
Disposal
The product should not be disposed of along with
household waste. Instead, the product must be disposed of
along with electrical waste by dropping it off at collection
points for recycling of electronic waste. To learn more about
where you can drop off your electronic waste for recycling,
contact your local authority or your local waste
management authority.
AUS
/NZ
