Mendota FV-41-M-PF2 MODERN, Руководство пользователя

Страница: 8 / 16

8 | P a g e
REMOTE TRANSMITTER OPERATING INSTRUCTIONS
TO TURN ON THE APPLIANCE
:
1. Press the ON/OFF button. The transmitter display will show all active icons on the screen.
2. Select the Thermostat Mode by pressing the Thermostat Key: OFF (meaning Manual
Mode), ON (meaning normal Thermostat) or Smart (meaning Smart Mode).
a. In OFF (Manual Mode), the appliance will ignite and start on HI.
b. In ON (Normal Thermostat Mode), the appliance will only ignite if the Set Temperature
is greater than the Room Temperature.
c. In SMART (Smart Mode), the appliance will only ignite if the Set Temperature is greater
than the Room Temperature.
TO TURN OFF THE APPLIANCE
, press the ON/OFF button.
MODE
KEY
Pressing the MODE KEY toggles between the various available functions: Flame Height, Fan Speed, Aux (Ac-
cent Light) On/Off and Secondary Burner On/Off.
Flame Height: 6 flame height Levels are available. While the Flame
Height Icon is displayed, pressing the Up or Down button
once will increase or decrease the flame height by 1 of 6 in-
crements. If the flame height is at Level 1 and the Down but-
ton is pressed, all burners will turn OFF. If in IPI mode, the
pilot light will also extinguish. If in Standing Pilot Mode, the
pilot light will remain ON. Note: If in SMART model, the flame
height function is not available for manual adjustment. In SMART mode,
the flame height regulates automatically.
Accent-Light Dimmer:
This function controls the Mendota Accent Light
functions. Pressing the UP key in this mode will TURN ON
the Accent Light and allow you to control the brightness of the
Accent Light in 6 steps. A single “beep” will confirm reception
of the command. Once you set the desired light brightness,
the system will remember your selected brightness level until
you manually change it.
NOTE:
The remote control transmitter supplied with the FV41-M model Fireplace will display two additional icons when scrolling
through using the MODE button. They are shown below. These two icon functions are NOT available for this model and
must be ignored. Press the MODE button to skip past these two icons to the next available icon.
THESE TWO ICONS ARE
PRESENT BUT ARE NOT
FUNCTIONAL. THE FAN
FUNCTION WILL BE
ACTIVE IF OPTIONAL
FANS ARE INSTALLED.