Mendota FullView AA-11-02980 FV36, Инструкция по установке и эксплуатации

Страница: 41 / 96

85-03-01110 FV36 Page 41
Exterior Vent Locations and Restrictions
Note: All measurements are to be taken from the center of the vent cap.

-
Vent Terminal

-
Air Supply Inlet

-
Area where terminal is not permitted
A = Clearance above grade, veranda, porch, deck, or
balcony (*18 inches (45 cm) minimum) H = *Not to be installed above a meter/regulator
assembly within 3 feet (90 cm) horizontally from the
center-line of the regulator; within a height of 15 feet
B = Clearance to window or door that may be opened
(*18 inches (45 cm) minimum.
I = *Clearance to service regulator vent outlet *3 feet
(92 cm) minimum.
C = *Clearance to permanently closed window
(minimum 18 inches (45 cm) recommended to
prevent condensation on window)
J = *Clearance to non-mechanical air supply inlet to
building or the combustion air inlet to any other
appliance.
12 inches (30 cm) minimum.
D = *Vertical clearance to ventilated soffit located
above the terminal from the center-line of the
terminal 18” (45 cm) min. Minimum 24” (60 cm
to Vinyl Soffit)
K = *Clearance to a mechanical air supply inlet
In USA, 3 feet minimum above, if within 10 feet
horizontally. In Canada, 6 feet minimum
E = *Clearance to unventilated soffit 18” min (45 cm)
min. Minimum 24” (60 cm to Vinyl Soffit) L = Clearance above paved side-walk or a paved
driveway located on public property (*7 feet (2.1 m)
minimum)
F = Clearance to outside corner - 12 inches (30 cm). M = Clearance under veranda, porch, deck, or balcony
(*18 inches (45 cm) minimum )
G = Clearance to inside corner - 12 inches (30 cm).
Vinyl surfaces require 24” min (60 cm).
N= Minimum 24” horizontal clearance to any surface,
such as an exterior surface, for vertical terminations.