Mendota E-FV44I ECHO SERIES, Инструкция по установке и эксплуатации

Страница: 7 / 48

Part #85-03-00855 6
MENDOTA FV-44i GAS DIRECT VENT FIREPLACE INSERT
SPECIFICATIONS & CLEARANCES
FV-44i Faceplate Dimensions
A B
Inches mm. Inches mm.
No Trim 31 788 44 1118
33 838 48 1220
36 914 52 1321
With Black
or Brass
Trim
31
1/16
792 44 1/8 1122
33
1/16
843 48 1/8 1224
36
1/16
920 52 1/8 1326
“
A
”
“
B”
The solid-fuel fireplace chimney must be
clean and in good working order and is con-
structed on non-combustible materials
Chimney cleanouts must fit properly.
The refractory, glass doors, screen, and log
grates can be removed from the solid-fuel
fireplace to accommodate the gas insert.
Smoke shelves, shields, and baffles can be
removed if attached with mechanical fasten-
ers.
Trim panels and surrounds shall not seal
ventilation openings in the fireplace.
WARNING: Failure to position the parts in
accordance with these diagrams or failure to
use only parts specifically approved with this
appliance may result in property damage or
personal injury.
Cutting of any sheet metal parts on the solid-
fuel fireplace is prohibited.
Minimum Allowable Fireplace Opening:
34” wide X 24” high X 17” Deep
NOTE: Installer must attach the sup-
plied warning label, included in the
instruction packet, to the inside of the
fireplace before installing insert.
18” MIN CLEARANCE