Mendota AA-11-03781, Руководство по установке, Страница: 15 / 22

Page 15 of 22 85-03-01096
4. Use the collar clips and self-drilling screws to secure the vent pipe to the top of the fireplace. Make sure the vent
pipe is pushed down against the inner shield while attaching the collar clips.
PREPARING VENT COMPONENTS FOR INSTALLATION
1.
Each kit comes with two 8” crimped starter collars. To install the starter collars, slide the end with the tabs through
the 8” holes on the bottom of the vent. Then, bend over all the tabs to hold the starter collar in place.
2. Each vent box kit comes with a front framing guide. The guide comes in two parts that need to be screwed together.
Line up the screw holes on the two halves and screw them together using 4 of the hex head sheet metal screws.
When screwed together, the parts will have a hole in the center which matches the size of the vent box outlet
opening.