Mendota AA-11-03781, Руководство по установке, Страница: 14 / 22

Page 14 of 22 85-03-01096
INSTALLATION INSTRUCTIONS
PREPARING FIREPLACE FOR INSTALLATION OF KIT
1. Locate the two circular cutouts on top of the fireplace. Use a side cutter or tin snips to cut the tabs around the
perimeter of the circle and remove the cutout.
2.
Next remove the insulation in the cutout to expose the fireplace’s top inner shield. This part also has a circular
cutout. Use a side cutter or tin snips to cut the tabs around the perimeter of the circle and remove the cut out.
3. Remove any loose
pieces of insulation and push the insulation away from the inner cutout so that when the 8” rigid
venting is inserted into the fireplace all of the insulation fits around the vent pipe.
Insert the 8” by 2’ rigid vent pipe
into the cutout on the fireplace. The vent pipe will sit on top of the inner shield. The cutout on the inner shield is
smaller than the vent pipe. Therefore, the vent will not pass through the inner shield cutout.