Mendota AA-11-03781, Руководство по установке, Страница: 1 / 22

85-03-01096
Cool Wall Vent Kit Installation Instructions
Cool Wall vent kits AA-11-03781, AA-11-03782 and AA-11-04062
Each vent kit must be used with AA-11-04060.
Approved for use with all Mendota ZC Fireplace models, except M27.
NOTE: This kit must be installed by a qualified installer. These instructions are to be used in conjunction
with the fireplace installation manual to insure proper installation.
These kits are designed to use natural convection to transfer warm air from the front of the fireplace to
a different location. The kits allow the warm air from the fireplace to enter the room farther up on the
fireplace chase front wall or side wall. This results in much lower breastplate, mantel and wall
temperatures above the top convection chamber of the fireplace.
REQUIRED TOOLS FOR INSTLALLATION
▪
Phillips Screw Driver
▪
Flat Screw Driver
▪ 1/4” Hex Head Driver
▪ 5/16” Hex Head Driver
▪
Drill or Impact Driver