Getting Started
Page 23
2.3
Troubleshooting at Start-up
If you have any problems at start-up of the G25A, you can check if the front-panel status
LED gives an error flash code.
You can also start the board with firmware default settings for troubleshooting.
2.4
Installing Operating System Software
By default, no operating system is installed on the G25A.
2.4.1
Installing Windows on USB Devices
The microSD card of the G25A is connected via USB. A standard Windows operating
system usually does not support direct installation on USB memory devices.
There are different solutions:
Add a hard drive (SATA, mSATA) on a peripheral board or side card
Switch to an Embedded Windows (like Windows Embedded Standard 7). These
Embedded Windows operating systems support being installed on and booted
from a USB device.
2.5
Installing Driver Software
For a detailed description on how to install driver software, please refer to the respective
documentation of the software package to be installed.
2.5.1
MDIS System Package
The G25A is supported by the MDIS framework.
MDIS stands for MEN Driver Interface System and is a framework for device drivers for
almost any kind of I/O hardware. It greatly simplifies system configuration, also in
combination with specialized board BSPs.
Chapter 3.3.3 Status LEDs on page 34
.
Please refer to the respective manufacturer's documentation on how to
implement the operating system.
See the MEN website for all available software:
www.men.de/products/g25a/#downl
See the MEN website for all available software:
www.men.de/products/g25a/#downl
See the
for more information on MDIS.
