MEN BL51E, Руководство пользователя

Страница: 29 / 110

Getting Started
20BL51E00 E2

2020-03-27 Page 29
»
Install the two heats sinks supplied with the kit at the sides of the BL51E using four
M2.5x12 TX8 Torx screws for each heat sink. The screws are included in the delivery
of the kit.
»
Insert the box PC into the opening in the kit’s front panel.
»
Take care that the small studs at the bottom of the front and rear panel of the box
PC are aligned with the corresponding holes in the bottom plate of the mounting
kit.
»
Press the BL51E down onto the bottom plate.