3
We make no representation for the errors, omissions or updates of this document. We also make
no representation for the data or music files lost of the player.
Microsoft Windows Media and Windows are trademarks of Microsoft Corporation.
Trademarks of other products mentioned in this user's manual are owned by their respective
companies or organizations.
System Requirement
System requirement of this player:
1.
Microsoft
®
Windows 98SE/2000/Me/XP
2.
Pentium 200MHz CPU or higher level CPU
3.
USB port
4.
Enough hard disk free space
5.
CD-ROM drive
Basic Operation
Connecting to a PC
Install Device Driver for Windows 98SE
1.
Execute setup.exe in driver CD and complete the driver installation.
2.
Reboot the PC.
3.
Connect the MP3 player to the USB port of PC
Operation Procedure
To upgrade firmware or copy music to the player, please first to power the player off and connect the player to the PC by using a USB cable.
After connecting to a PC, the system will create a removable drive in “My Computer” and from which the data stored on the player becomes
accessible. “Ready” will be shown on the player if successfully connected. Note that please do not use USB hub or USB extended line when connection.
The files stored on the player can be managed through Windows File Explorer or “My Computer” to copy favorite music files or data to the player; or
deleting files stored in the player.
After file access is completed, please follow the steps below to remove the player to prevent file damages.
Removing Hardware
Use the left button on the mouse to double-click on the icon for removing hardware that is located on the
lower right corner of the screen. Please refer to the right picture:
When the following screen appears, click “Stop” button to remove the hardware safely. The USB cable
can then be removed from the player, please refer to the right picture:
(1) Play/Pause
Button
(2) Rewind
Button
(3) Forward
Button
(4) Volume Up Button
(5) Volume Down Button
(6) Hold Key
(7) Power/Menu Button ( /M)
(8) REC Button
(9) Earphone
Jack
(10) USB Port
(11) Display
Area
(12) Reset
