Memorex MVT2139 A Series, Руководство по обслуживанию

Страница: 22 / 68

C3-1
PREVENTIVE CHECKS AND SERVICE INTERVALS
CONFIRMATION OF HOURS USED
POWER ON total hours and PLAY/REC total hours can be checked on the screen.
Total hours are displayed in 16 system of notation.
NOTE: If you set a factory initialization, the total hours is reset to "0".
The confirmation of using hours will not be possible if clock has been set. To reset clock, either unplug
AC cord and allow at least 5 seconds before Power On.
1.
2.
3. Set the VOLUME to minimum.
While holding down VOLUME button on front cabinet, press key 6 on remote control simultaneously.
After the confirmation of using hours, turn off the power.
INIT 00 83
0010
0003
POWER ON
PLAY/REC
Initial setting content of MEMORY IC.
POWER ON total hours.
PLAY/REC total hours.
(16 x 16 x 16 x thousands digit value) + (16 x 16 x hundreds digit value) + (16 x tens digit value) + (ones digit value)
The following standard table depends on environmental conditions and usage.
Parts replacing time does not mean the life span for individual parts.
Also, long term storage or misuse may cause transformation and aging of rubber parts.
The following list means standard hours, so the checking hours depends on the conditions.
: Clean
: Check it and if necessary, replace it.
Parts Name
Audio Control Head
Full Erase Head
(Recorder only)
Cylinder Unit
Capstan Belt
Pinch Roller
Capstan DD Unit
Loading Motor
Tension Band
Capstan Shaft
Tape Running
Guide Post
T Brake Band
Clutch Ass'y
Idler Arm Ass'y
Time
500
hours
1,000
hours 1,500
hours 2,000
hours 2,500
hours
Notes
Clean those parts in
contact with the tape.
Replace when rolling
becomes abnormal.
Clean the Head
Clean the rubber, and parts
which the rubber touches.