MEMOREX-CE.COM
MVD2501
User Guide
Please read these instructions completely
before operating this product.
MEM-CE, LLC.
11485 Valley View Road, Eden Prairie, MN 55344 USA
MEMOREX-CE.COM
Memorex and the Memorex logo are trademarks of Imation Corp and its affiliates. The Bluetooth
®
word
mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by
Imation Corp is under license. All other trademarks are the property of their respective owners.
For additional setup, operating assistance or an electronic version of this user manual, please visit
www.MEMOREX-CE.COM
4. You have now programmed the first program. Repeat steps 2 and 3 to set more
programs (up to 20).
5. When finished, select START using the Navigation buttons then press the ENTER
button
x
to start playback.
6. To cancel/stop program, press the PROG
ao
button, select Stop using the
Navigation Buttons
y
. Press Exit to close the program menu.
SUBTITLE
Press the SUBTITLE button
X
repeatedly to select the subtitle language or turn the
subtitle menu on or off. This function is not available on all discs.
DVD Menu
Press the MENU button
w
, the menu of the current DVD will appear on the screen.
Press the Navigation buttons
y
to select the desired option and then press the
ENTER button
x
to confirm the selection. This function is not available on all discs.
TITLE
To display the title menu (if available) of the disc, press the TITLE menu button
bn
.
Press the Navigation buttons
y
to select your desired option and then press the
ENTER button
x
to confirm the selection.
ZOOM
During the playback of the DVD disc, repeatedly press the ZOOM button
al
to zoom
in or out of the image. While zoomed in (enlarged), press the Navigation buttons
y
to move the image on the TV screen.
ANGLE
Some discs may contain scenes which have been shot simultaneously from a
number of different camera angles. This feature only works on discs with more than
one camera angle. The jacket will be marked with this info. Press the ANGLE button
ak
repeatedly to select the desired scenes. This function is not available on all discs.
WIDE
Press the WIDE
br
button to switch the aspect ratio to Normal/PS, Normal/LB, and
WIDE to fit your TV display. This function is not available on all discs.
N/P (NTSC/PAL)
Press the N/P button
at
repeatedly to select one of the video output modes.
SLOW
1. During playback, press the SLOW button
ct
to enter slow forward status. There
are 4 speeds available: 1/ 2, 1/ 4, 1/8 and 1/16.
2. Press the Play/Pause button
bm
to resume normal playback or keep pressing
the SLOW button
ct
until normal playback.
STEP
During movie playback, press the STEP button
bs
repeatedly to play the movie
frame by frame. Press the Play/Pause button
bm
to resume normal playback.
REPEAT
Press the REPEAT button
am
repeatedly to select different repeat modes.
Press Once: Chapter (Repeat Chapter)
Press Twice: Title (Repeat Title)
Press Three Times : AII (Repeat AII)
A-B Repeat
While in the Playback mode, press the Repeat A-B button
an
to define where you
want the section to start. Press the Repeat A-B button
an
again to define where you
would like the section to end, the unit will then play the selected area continuously.
Press the Repeat A-B button
an
again to cancel A-B Repeat mode.
Random
Press RANDOM button
cl
to play the files randomly. “Random” appears on the
screen, press button again to cancel.
GOTO
1. During playback, press the GOTO button
ck
to search within the title, to go to a
specific chapter or to go to a specific time with in the track.
2. Press the GOTO button
ck
until desired search mode.
3. Press the 0 - 9 buttons
v
to select the search item / time / title / chapter, for
example:
TT: –/– CH: –/–
Title/ Input Chapter Number
TT: –/– Time: –:–:–
Title/Input Time h:mm:ss
CH: –/– Time: –:–:–
Chapter/Input Time h:mm:ss
4. Press the ENTER button
x
to play.
Program Playback
Select up to 20 Title/Chapters (or tracks for CD) to program play as follows:
1. Press the PROG
ao
button; the program screen will appear.
2. Select the desired program number
(best to start with 1), then select the
desired title number using the 0-9/+10
buttons
v
.
3. The cursor will jump to the Chapter
column. Select the desired chapter
number using the 0-9/+10 buttons
v
.
If an incorrect number is entered, press
the CLEAR button
ap
.
MVD2501 DVD OPERATION
MVD2501 CD/MP3 OPERATION
MVD2501 PICTURE DISC OPERATION
SYSTEM SETUP
MVD2501 DVD OPERATION
SPECIFICATIONS AND COMPATIBILITY
Power Source ................................................................................... AC 120 V ~ 60Hz
Power Consumption ............................................................................................ 10 W
Signal System ............................................................................................. NTSC/PAL
Operating Temperature ....................................................................... +5°C to +35° C
DVD-VIDEO DISC: 12cm single-sided, single layer, 12cm single-sided, dual layer,
12cm double-sided, single layer, 8cm single-sided, single layer, 8cm single-sided,
dual layer, 8cm double-sided, single layer
COMPACT DISC: 12 cm disc, 8 cm disc
Frequency Responses:
DVD (Linear Audio) .................................... 20Hz ~ 20KHz (48KHz / 96KHz sampling)
CD Audio .............................................................................................. 20Hz ~ 20KHz
Wavelength .......................................................................................................655nm
Laser Power ................................................................................................... .Class 1
Video Output Level ........................................................................................... 1 Vp-p
Audio Output Level ..................................................................... 2 Vrms (1KHz, 0 dB)
Notes:
• If the settings are incorrect there will be no picture on the TV screen.
• Press the N/P button repeatedly until the screen turns to normal.
Note:
The default password is 136900.
Notes:
• The disc loading period of JPEG discs may be longer than loading DVD discs.
• The operation is similar to DVD disc playing.
Note:
The preference page can be opened only when no disc is playing.
LIMITED WARRANTY
MEM-CE, LLC. warrants this product against defects for 90 days from the date of original purchase.
MEM-CE, LLC. shall not be responsible for any lost data or other incidental or consequential
damages related to this product. Some jurisdictions do not allow limitations on how long an implied
warranty lasts, or the exclusion or limitation of incidental or consequential damages, so the above
limitations or exclusions may not apply to you. This limited warranty gives you specific legal rights,
and you may have other rights which may vary from one state, province or country to another.
PLEASE KEEP ALL PACKAGING MATERIAL FOR AT LEAST 90 DAYS IN CASE YOU NEED TO RETURN
THIS PRODUCT TO YOUR PLACE OF PURCHASE OR MEM-CE, LLC.
FOR ADDITIONAL SET-UP OR OPERATING ASSISTANCE, PLEASE VISIT OUR WEBSITE AT:
WWW.MEMOREX-CE.COM
OR
CONTACT CUSTOMER SERVICE:
For customers calling within the
United States and Canada, call
1-877-363-6673
TROUBLESHOOTING
No Power.
• Make sure the unit is plugged in to a working AC outlet.
Power on, but unit not functioning properly.
• Wrong type of disc is inserted.
• The disc is dirty or inserted incorrectly; remove, clean and reinsert.
• Some features and functions are not available on all discs.
• The equipment is not connected properly, see CONNECTIONS section.
• The INPUT of the TV is not set to receive the disc signal output.
• TV’s Power is off, turn on.
• Unit needs to be reset to NTSC, press the N/P button to do this.
The remote control is not working.
• The batteries are weak, dead or not installed properly
• The remote is not aimed at the sensor and within 15 feet.
The Preferences menu cannot be accessed.
• Remove the disc from the disc tray, as there cannot be any disc inserted when
setting the preferences.
Playback of a CD (Standard or MP3)
1. Plug the AC cord into the outlet once the DVD player is connected to your TV.
2. Press the Power button
aq
to turn the DVD player on; the Power indicator will light
green.
3. Press the OPEN/CLOSE button
u
to open the disc tray. Insert a disc with the
label side facing up on the disc tray. Press the OPEN/CLOSE button
u
again to
close the tray; playback will start automatically.
4. If the Menu appears, use the Navigation buttons
y
to select the desired option
and press the ENTER button
x
to select it.
5. To stop playback, press the STOP button
bp
. Because the unit will remember
where you stopped (not applicable in CD mode), simply press the Play/Pause
button
bm
to resume playback where you left off (resuming playback). If the STOP
button
bp
is pressed twice, the unit will stop completely.
Number Buttons 0-9/+10
To go directly to a track, simply press the 0-9 and/or +10 buttons
v
.
AUDIO
Press the AUDIO button
bo
repeatedly to select the audio mode:
Mono Left - Mono Right - Mix/Mono - Stereo
REPEAT
Press the REPEAT button
am
repeatedly to select different repeat modes.
Press Once: Track Repeat
Press Twice: Repeat All
A-B Repeat
While in the Playback mode, press the Repeat A-B button
an
to define where you
want the section to start. Press the Repeat A-B button
an
again to define where you
would like the section to end, the unit will then play the selected area continuously.
Press the Repeat A-B button
an
again to cancel A-B Repeat mode.
RANDOM
Press RANDOM button
cl
to play the files randomly. “Random” appears on the
screen, press button again to cancel.
GOTO
1. During playback, press the GOTO button
ck
to search the title, chapter or track.
2. Press the GOTO button
ck
until desired search menu is displayed.
3. Use the 0 - 9 buttons
v
to input the search time or track number, for example:
Disk Go To:
Input Time mm:ss
Track Go To:
Input Time mm:ss
Select Track: –/–
Input Track Number
4. Press the ENTER button
x
to play.
Program Playback
Select up to 20 Title/Chapters (or tracks for CD) to program play as follows:
1. Press the PROG
ao
button; the program screen will appear.
2. Select the desired program number (best to start
with 1), then select the desired track using the
0-9/+10 buttons
v
.
3. If an incorrect number is entered, press the CLEAR
button
ap
.
4. You have now programmed the first program.
Repeat step 2 to set more programs (up to 20).
5. When finished, select START using the Navigation
buttons then press the ENTER button
x
to start playback.
6. To cancel/stop program, press the PROG
ao
button, select Stop using the
Navigation Buttons
y
. Press Exit to close the program menu.
or minimize in the following order: 50%, 75%, 100%,125%,150%, 200%. To
resume normal viewing, press the ZOOM button
al
until the picture on the screen
becomes normal.
8. To rotate, press the Navigation buttons
y
as follows: Up - Rotate 360° Left -
Rotate 270° Down - Rotate 180° Right- Rotate 90°.
REPEAT
Press the REPEAT button
am
repeatedly to select different repeat modes.
Press Once: Single - Play the current picture and then stop.
Press Twice: Repeat One - Play the current picture repeatedly.
Press Three Times: Repeat Folder - Play the pictures in the selected folder repeatedly.
Press Four Time: Repeat Off
To Access the Main Menus:
The setup menu lets you customize the DVD player by allowing you to select various
language preferences, turn screen saver on and off and more.
Below, find the menu to view the settings.
With no disc in the tray, enter the SETUP MENU by pressing the SETUP button
bt
.
Use the Navigation buttons
y
to navigate through the menus/screens and press the
ENTER button
x
to select the highlighted option. After changing an option, press the
ENTER button
x
.
After setting, press the SETUP button
bt
to save the settings and exit.
General Setup Page
TV Display:
Select a display that affects how a disc’s content appears on your TV
screen (Normal/PS, Normal/LB, Wide).
Angle Mark:
Select ON to turn the angle marks ON and OFF to turn them off. Angle
marks are not available on all DVDs.
OSD Lang:
Select the On-Screen language.
Screen Saver:
When this option is set to ON, the screen saver will come on when
the unit stops or the image is paused for approximately ten minutes. When this
option is OFF, the screen saver will not come on.
Last Memory:
Turn this option On or Off. For DVD discs only with this option turned
On: If you take the disc out of the player, the play position is stored in memory. When
you load the disc next time, you can resume playback.
Audio Setup Page
Downmix:
Select LT/RT or Stereo as the audio output connection. If set to Lt/Rt, the
rear left or rear right channels in Dolby 5.1 recording DVD will play on both Left and
Right Speakers. If set to Stereo, connect the DVD player to TV through 2.1 audio
connection.
Dolby Setup Page
Dual Mono:
Select Stereo, L-Mono (Play Left channel on all speakers), R-Mono (Play
Right channel on all speakers) or Mix-Mono (Mixed Right and Left channel then play
on all speakers) as desired.
Dynamic:
When listening to a Dolby disc, Dynamic Range Control allows the unit
to make the loud parts of a movie’s audio track quieter than it would be in the
theatre, without making the dialog of the actors any quieter. This would be useful,
for instance, when you want to watch a movie in the evening when others might be
sleeping. Adjust as desired.
Video Setup Page
Component:
Select the Component output as desired.
Preference Setup Page (no disc can be inserted)
TV Type:
Select PAL when outputting to a PAL TV. Select NTSC when using a NTSC
TV. In the USA, the standard is NTSC. Select AUTO to auto select.
Audio, Subtitle or Disc Menu:
Select the desired language.
SYSTEM SETUP
Parental:
Select to go to the Parental screen. Using the Navigation buttons
y
, select
the desired rating level for movies played from 1-8 with 1 allowing most movies
and 8 restricting the most. For example, if you select “6”, discs that are level 7 or 8
cannot play also. When done select OK using the Navigation buttons
y
, then press
the ENTER button
x
.
Password:
Select to go to the Password screen where you can turn the password
Mode On or Off and change the Parental Password.
Default:
Select this option to reset all the preferences to their original factory
settings. This is useful to reset the NTSC System.
MVD2501 PICTURE DISC OPERATION
Playback of a Picture Disc (Jpeg)
1. Plug the AC cord into the outlet once the DVD player is connected to your TV.
2. Press the Power button
aq
to turn the DVD player on; the Power indicator will light
green.
3. Press the OPEN/CLOSE button
u
to open the disc tray. Insert a disc with the
label side facing up on the disc tray. Press the OPEN/CLOSE button
u
again to
close the tray; the folder/file list will appear on the screen.
4. Use the Navigation buttons
y
to highlight the desired folder, then press the
ENTER button
x
to confirm. The file list will appear on the screen.
5. Use the Navigation buttons
y
to highlight the desired file, then press the ENTER
button
x
to start playback.
6. To change the Slideshow Effect, press the PROG button
ao
repeatedly.
7. During the playback of JPEG discs, press the ZOOM button
al
until “100%” is
displayed on the screen, then press the Skip
:
bk
or
9
U
button to enlarge
DVD Player
Compact
Let Me Entertain You
