background image

IMPORTANT SAFETY INSTRUCTIONS 

 

When using your telephone equipment, basic safety precautions should 

always be followed to reduce the risk of fire, electric shock and injury to 
persons, including the following : 

1.

 

Do not use this product near water, for example, near a bath tub, wash 

bowl, kitchen sink, or laundry tub, in a wet basement or near a swimming 
pool.  

2.

 

Avoid using a telephone ( other than a cordless type ) during an 

electrical storm. There may be a remote risk of electric shock from lightning. 

3.

 

Do not use the telephone to report a gas leak in vicinity of the leak. 

4.

 

Use only the power cord and batteries indicated in this manual. Do not 

dispose of batteries in a fire. They may explode. Check with local codes for 
possible special disposal instructions. 

 

SAVE THESE INSTRUCTIONS 

 
 

Consumer Information:

 

 

This equipment complies with Part 68 of the FCC rules and the requirements 

adopted by the ACTA. On the 

bottom 

of this equipment is a label that contains, 

among other information, a product identifier in the format 

US:AAAEQ##TXXXX.

 If requested, this number must be provided to the 

telephone company. 

 

An applicable certification jacks Universal Service Order Codes (USOC) for 

the equipment is provided (i.e., 

RJ11C

) in the packaging with each piece of 

approved terminal equipment.   

 

A plug and jack used to connect this equipment to the premises wiring and 

telephone network must comply with the applicable FCC Part 68 rules and 
requirements adopted by the ACTA. A compliant telephone cord and modular 
plug is provided with this product. It is designed to be connected to a compatible 
modular jack that is also compliant. See installation instructions for details. 

 

The REN is used to determine the number of devices that may be connected to 

a telephone line. Excessive RENs on a telephone line may result in the devices 
not ringing in response to an incoming call. In most but not all areas, the sum of 
RENs should not exceed five (5.0). To be certain of the number of devices that 
may be connected to a line, as determined by the total RENs, contact the local 
telephone company. [For products approved after July 23, 2001, the REN for this 
product is part of the product identifier that has the format 

US:AAAEQ##TXXXX

. The digits represented by ## are the REN without a 

decimal point 

(e.g

., 03 is a REN of 0.3). For earlier products, the REN is 

separately shown on the label.] 

 

If this telephone

 

causes harm to the telephone network, the telephone company 

will notify you in advance that temporary discontinuance of service may be 

02-0043 USA 

2

Содержание MPH601






Отзывы: