manualshive.com logo in svg

Memmert Waterbath WNB 7-45, Руководство по эксплуатации

Поделиться
Скачать
Memmert Waterbath WNB 7-45 Скачать руководство пользователя страница 3

page 3

1 General notes and  safety notes

You have purchased a technically fully proven product which has been produced in Germany with the use 
of high-grade materials and the application of the latest manufacturing techniques; it has been factory 
tested for many hours.
In addition we guarantee the supply of spare parts over 10 years.

This mark in the Operating Instructions means:

Watch out

Important Note

This mark on the product means:

Note Operating Instructions

Warning – bath hot when operating

Observation of the Operating Instructions is necessary for faultless

operation and for any possible claims under warranty. If these

Instructions are disregarded, all claims under warranty, guarantee

and indemnification are excluded.

The right to technical modifications is reserved.
Dimensional details are not binding.

1.1  Transport

Always use gloves!
If the units WNB 22 to 45 have to be carried, at least 2 persons are required for this mode of transport.

Place the bath accurately horizontal and

not on an inflammable support.

BASIC

Содержание Waterbath WNB 7-45





















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды