Memmert IPP 110 Скачать руководство пользователя страница 38

Страница: 38 / 44

Maintenance and service

Maintenance and service

8.1

Cleaning

Warning!

Danger of injury by electric shock. Before any cleaning work,

pull out the mains plug.

Warning!

In case of appliances of a certain size, you can get accidentally

locked in, which is life-threatening. Do not climb into the appliance!

8.1.1 Working chamber and metal surfaces

Regular cleaning of the easy-to-clean working chamber prevents build up of material remains

that could impair the appearance and functionality of the stainless steel working chamber

over time.
The metal surfaces of the appliance can be cleaned with normal stainless steel cleaning

agents. Make sure that no rusty objects come into contact with the working chamber or with

the stainless steel housing. Rust deposits can lead to an infection of the stainless steel. If rust

spots should appear on the surface of the working chamber due to impurities, the affected

area must be immediately cleaned and polished.

8.1.2 Plastic parts

Do not clean the ControlCOCKPIT and other plastic parts of the appliance with caustic or

solvent-based cleaning agents.

8.1.3 Glass surfaces

Glass surfaces can be cleaned with a commercially available glass cleaner.

8.1.4 Peltier cooling module

In order to guarantee perfect

function and long lifetime of the

Peltier cooling modules, it is

absolutely essential that you

remove dust deposits from the

heat sink on the rear of the

appliance (with a vacuum

cleaner, paintbrush or bottle

brush, depending on the

amount).
To make cleaning easier, the

cover can be removed after the

screws have been loosened (Fig.

23).

Fig. 23

Cover of the Peltier cooling modules on the

rear of the appliance

Содержание IPP 110













































Результаты поиска

Содержание IPP 110

Отзывы:

Похожие инструкции для IPP 110

Бренды по названию

Популярные бренды

Memmert IPP 110, Руководство по эксплуатации

Результаты поиска

Содержание IPP 110

Отзывы:

Похожие инструкции для IPP 110

Бренды по названию

Популярные бренды