22
Operation and control
5.4.4
Timer operation
In timer operation, you can adjust the time the appliance runs at the set temperature:
1. Press the activation key to the left of
the timer display. The timer display is
activated.
.5 C
100
Set 1
TIMER
0
Ende 23.11. 09:00
00
h
0
m
2. Turn the turn control until the desired
duration is displayed – in this exam-
ple 4 hours 30 minutes. The approxi-
mate end time is shown beneath, in a
smaller font.
TIMER
End
0
23.Nov 13:30
04
m
h
3
Up to a duration of 23 hours 59 minutes, the time is displayed in hh:mm
(hours:minutes) format. For 24 hours and more, the format dd:hh (days:hours) is
used. The maximum duration adjustable is 99 days 23 hours.
3. Press the confirmation key to confirm.
The display now shows the remain-
ing time in a large font and the ap-
proximate end time in a smaller font
beneath.
TIMER
30
m
04
h
End 23.Nov 13:30
4.
Now, as described under 5.4.2 , set the temperature you want the appliance to oper-
ate at. The set value can be changed at any time while the timer elapses. The changes
are effective immediately.
In
Setup
, you can choose if the timer should run setpoint-dependent or not. This
determines whether the timer should not start until a tolerance band around the set
temperature is reached or if it should start right after activation (see page 32). If the
timer runs setpoint-dependent, this is indicated by the
symbol in the timer
display.
When the timer has elapsed, the display shows 00:00. Heating
or cooling is switched off.
To deactivate the timer, open the timer display by pressing the
activation key again and then turning the turn control to
reduce the timer setting until --:-- is displayed. Confirm with
the confirmation key.
TIMER
00
m
00
h
End 23.Nov 13:30
TIMER
--
m
--
h
End 23.Nov 13:30
Содержание IPP 110
Страница 42: ...42 Index ...
Страница 43: ......