Member's Mark TF2038101-MM-01, Руководство по сборке, использованию и уходу, Страница: 7 / 19

TF2038101-MM-01 English
P. 7
20190508 Ver1

Do not release liquid propane (LP) gas into the atmosphere. This is a hazardous practice.

To remove gas from LP tank, contact an LP dealer or call a local fire department for assistance.
Check the telephone directory under
“GAS Companies” for nearest certified LP dealers.
LP Tank Exchange

Many retailers that sell appliances offer you the option of replacing your empty LP tanks through
an exchange service, Use only those reputable exchange companies that inspect, precision fill,
test and certify their cylinders. Exchange your tank only for an OPD safety feature-equipped tanks
as described in the
“LP Tank” section of this manual.

Always keep new and exchanged LP tanks in upright position during use, transit or storage.

Leak test new and exchanged LP tanks BEFORE connecting to appliance.
LP Tank Leak Test
For your safety

Leak test must be repeated each time LP tank is exchanged or refilled.

Do not smoke during leak test.

Do not use an open flame to check for gas leaks.

LP Tank must be leak checked outdoors in well-ventilated area, away from
open flames or sparks.
Use a clean paint brush and 50/50 soap and water solution.
Use mild soap and water. Do not use household cleaning agents. Damage to gas train
components can result.
Brush soapy solution onto all weld seams and entire valve area.
WARNING
If
“growing” bubbles appear, do not use or move the LP tank. Contact an LP gas supplier or your
fire department.
Connecting Regulator to the LP Tank
1. Place LP tank on a secure, level, and stable surface.
2. Turn control knob to the OFF position.
3. Turn LP tank OFF by turning OPD hand wheel clockwise to a
full stop .
4. Remove the protective cap from the Type1 outlet. Always
use protective cap and strap supplied with valve.
5. Hold regulator, insert nipple (B) into Type 1 outlet. Hand
tighten coupling nut, holding regulator in a straight line (C)
with LP Type 1 outlet so as not to cross thread the
connection.