9
ASSEMBLY INSTRUCTIONS
5
C
BB
C
K
4
5
6
D
DD
4. Attach Lower Pole (F) to Cylinder
Housing Assembly (G) using M6 x 10
mm bolts (EE), and then put the Beauty
Ring (E) through the Lower Pole on top
of Cylinder Housing Assembly (G).
5. Screw Reflector Spacers (BB) into the
top of Burner Assembly (C).
6. Feed the Regulator & Hose Assembly
(K) and connect the Burner Assembly
(C) to the Upper Pole (D).
6.1. Feed the Regulator & Hose
Assembly (K) into and go through
the Upper Pole (D).
6.2. Screw Burner Assembly (C) onto
Upper Pole (D) until the holes on
bottom of Burner Assembly (C) is
aligned to the holes on top of
Upper Pole (D). Fix them by using
four M5 x 8 mm Black Bolts (DD).
Ensure they are fully tightened.
x 3
Reflector Spacer
BB
G
EE
E
F
x 4
M6 x 10 mm Bolt
EE
D D
