manualshive.com logo in svg

Meltem M-WRG-ES, Руководство по установке

Поделиться
Скачать
Meltem M-WRG-ES Скачать руководство пользователя страница 3

Installation manual 

Outer wall terminals M-WRG-ES, M-WRG-ESR, M-WRG-ESG

- 3 -

Meltem Wärmerückgewinnung GmbH & Co. KG

Am Hartholz 4 · D-82239 Alling

[email protected] · www.meltem.com

VENTILATION THE RIGHT WAY

V E N T I L AT I O N   &   H E AT   R E C O V E R Y

1  Introduction

1.1 

Notes on this installation manual

This installation manual contains important information that should be followed when installing the 

outer wall terminals.

 

►

Read all the instructions carefully before installing the outer wall terminal to avoid possible 

risks and mistakes.

 

►

When installation is complete, give these instructions to the home owner, caretaker or prop-

erty manager.

 

►

These instructions are part of the product. Keep the instructions in a safe place for future 

reference.

WARNING

 

►

Follow ALL danger and warning instructions and notes on precautionary measures.

 

►

Read section „2 Safety instructions“ on page 6 carefully.

1.2  Description

These instructions describe how to install the outer wall terminals M-WRG-ES, M-WRG-ESR and 

M-WRG-ESG on an external wall.

1.2.1 Outer wall terminal stainless steel pod M-WRG-ES

 

—

M-WRG-ES

,  

outer wall terminal stainless steel pod,  

part no. 5150

 

—

M-WRG-ES/SD

,  

outer wall terminal stainless steel pod with 

increased noise protection,  

part no. 5150-1

 

—

M-WRG-ES-P

,  

outer wall terminal stainless steel pod,  

white powder-coated,  

part no. 5153

 

—

M-WRG-ES-P/SD

,  

outer wall terminal stainless steel pod,  

white powder-coated, with increased noise 

protection,  

part no. 5153-1

Fig. 1:  Outer wall terminal stainless steel 

pod M-WRG-ES

Содержание M-WRG-ES

























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды