manualshive.com logo in svg

Meltem M-WRG-ES, Руководство по установке

Поделиться
Скачать
Meltem M-WRG-ES Скачать руководство пользователя страница 22

Installation manual 

Outer wall terminals M-WRG-ES, M-WRG-ESR, M-WRG-ESG

- 22 -

Meltem Wärmerückgewinnung GmbH & Co. KG

Am Hartholz 4 · D-82239 Alling

[email protected] · www.meltem.com

VENTILATION THE RIGHT WAY

V E N T I L AT I O N   &   H E AT   R E C O V E R Y

6 

Cleaning and care instructions

6.1  Stainless steel outer wall terminals

NOTE

The thin and transparent passive coating on the surface protects the stainless steel against corro-

sion. However, dust and other soiling from the atmosphere can still be deposited on the surface, 

causing flash rusting.

 

►

Do not remove the protective film from the outer wall terminals until the installation is com-

plete.

 

►

Clean the outer wall terminals after installation using a soft, lint-free cloth and stainless steel 

cleaner.

 

►

Remove any flash rust that is already present using a soft, lint-free cloth and stainless steel 

cleaner.

 

►

Immediately remove particles of iron, metal filings, plaster and swarf from the surface of the 

outer wall terminals.

 

►

Remove lime and cement spatter as quickly as possible before it hardens from the surface of 

the outer wall terminals.

 

►

Do not use abrasive cleaning utensils (pan scourers, steel wool, etc.) and do not use clean-

ing agents containing chlorine or hydrochloric acid.

NOTE

Corrosion caused by flash rust is not covered by the warranty.

6.2  Powder-coated outer wall terminals

 

►

Clean the outer wall terminals after installation using a soft, lint-free cloth and mild soapy 

water.

 

►

Immediately remove particles of iron, metal filings, plaster and swarf from the surface of the 

outer wall terminals.

 

►

Remove lime and cement spatter as quickly as possible before it hardens from the surface of 

the outer wall terminals.

 

►

Do not use abrasive cleaning utensils (pan scourers, steel wool, etc.).

Содержание M-WRG-ES

























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды