Operating instructions
M-WRG-S/Z-T(-F,-FC) / M-WRG-S/Z-T(-F,-FC)-FU ventilation unit
- 7 -
Meltem Wärmerückgewinnung GmbH & Co. KG
Am Hartholz 4 · D-82239 Alling
[email protected] · www.meltem.com
VENTILATION THE RIGHT WAY
V E N T I L AT I O N & H E AT R E C O V E R Y
1.4
EC Declaration of Conformity
The ventilation units described below
Type:
Part number
M-WRG-S/Z-T
5016-1-1
M-WRG-S/Z-T-F
5016-1-1-1
M-WRG-S/Z-T-FC
5016-1-1-2
M-WRG-S/Z-T-FU
5016-1-3
M-WRG-S/Z-T-F-FU
5016-1-3-1
M-WRG-S/Z-T-FC-FU
5016-1-3-2
manufactured by
Meltem Wärmerückgewinnung GmbH & Co. KG
Am Hartholz 4
82239 Alling
conform to the regulations and standards listed in the EC Declaration of Conformity provided.
1.5
General building control approval (for Germany)
A valid building control approval from the
Deutsches Institut für Bautechnik (DIBt) must be
obtained for the ventilation unit before it is in-
stalled in Germany. This approval can be provided
upon request or can be downloaded from our web-
site at
www.meltem.com/waermerueckgewinnung/
(see also the QR code on the back
page of these instructions).
The approval number is Z-51.3-138 (see item 1 in
►
For installation outside Germany, the
national regulations applicable in your
country should be followed.
1.6
Nameplate
You will find the nameplate on the intermediate plate on the inside of the housing (see item 2 in
Fig. 4: Approval number and nameplate