Mellerware Koffy!, Руководство пользователя

Страница: 6 / 60

EN
FILLING WITH COFFEE
Remove the filter holder (E).
Insert the desired ground coffee
filter (L or M) into the filter holder.
FILTER EXTRACTION
The filterholder includes a spring
inside, whose function is to avoid
the fall of the sieve when throwing
the used coffee. That spring
produces a lateral tightening on
the filter.
Due to this tightening, to remove
the filter for exchange or cleaning,
it may be necessary to use a tool.
We recommend using a
roundtipped knife or a tip of a
teaspoon, so that it can be placed
between the upper edge of the
filterholder and the bottom of the
sieve wing.
A small turn will cause them to
separate from each other and will
facilitate the extraction
Filter L (smaller one) can be used
either for ground coffee or
paper pods.
We recommend using natural toast
coffee, as using some roasted
coffee may affect the operation of
the machine.
Fill the chosen removable filter (1 or
2 cups) with ground coffee (6-7 g
per cup to be prepared).
Using measuring spoon, for 1
coffee, put 1 spoonful and for 2
coffees, put in 2 spoonfuls.
Next lightly press down the ground
coffee with the back of the spoon.
Before fitting the filter holder in the
coffeemaker assembly, turn the
ladleholder backwards.
Fit the filter holder in the appliance
once more.
Position the filter holder in the
coffee assembly by inserting the
assembly downwards and turning
it anticlockwise, from left to right,
until it locks.
USE
Connect the appliance to
the mains.
Turn on the appliance by pressing
the start/stop button (G).
The pilot light (D) will flash red.
Wait until the pilot light (D) turns
blue, indicating that the correct
temperature has been reached.
Place one or two preheated cups
at the outlet of the portafilter.
Turn the coffee/steam selector (C)
to the coffee position.
The coffee delivery will start. When
you have obtained the desired
amount of coffee, turn the knob (C)
towards the central position 0.
Wait a few seconds and remove
the coffee cups.
Remove the filter holder (E) and
empty the grounds.
Wash the filter holder with water
and dry well.
Check that the removable filter
is perfectly positioned in the
filter holder.
Attach the filter holder to the
appliance again.
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–