Mellanox Technologies SX1012, Руководство пользователя

Страница: 44 / 107

Installation
Rev 1.4 47 Mellanox Technologies
Step 2.
Grasping the handle with your right hand, push the latch release with your thumb while
pulling the handle outward. As the power supply unit unseats, the power supply unit status
LEDs will turn off.
Step 3.
Remove the power supply unit.
Figure 27: Power Supply Unit Extraction
OK
!
!
OK OK
!
Latch release
Push Here
Figure 28: PS Unit Pulled Out
 To insert a power supply unit:
Step 1.
Make sure the mating connector of the new unit is free of any dirt and/or obstacles.
Step 2.
Insert the power supply unit by sliding it into the opening until a slight resistance is felt.
Step 3.
Continue pressing the power supply unit until it seats completely. The latch will snap into
place, confirming the proper installation.
Step 4.
Insert the power cord into the supply connector.
Step 5.
Insert the other end of the power cord into an outlet of the correct voltage.
Do not attempt to insert a power supply unit with a power cord connected to it.
The green power supply unit indicator should light. If not, repeat the whole procedure
to extract the power supply unit and re-insert it.