manualshive.com logo in svg

Mellanox Technologies Spectrum SN2410, Руководство пользователя по оборудованию

Поделиться
Скачать
Mellanox Technologies Spectrum SN2410 Скачать руководство пользователя страница 43

Software Management

Rev 1.2

Mellanox Technologies

43

3

Software Management 

The systems include an embedded management CPU card that runs a management software. 
• For MLNX-OS systems management package and related documentation, visit the 

product page:

 

http://www.mellanox.com/page/mlnx_os.

• For Cumulus® Linux® software management instructions, refer to the 

Cumulus Linux 

User Guide

.

3.1

Upgrading Software 

3.1.1

MLNX-OS Software Upgrade 

Software and firmware updates are available from the Mellanox Support website. Check that 
your current revision is the same one that is on the Mellanox website. If not upgrade your soft-
ware. Copy the update to a known location on a Remote server within the user’s LAN.
Use the CLI or the GUI in order to perform software upgrades. For further information please 
refer to the MLNX-OS Software User Manual section Upgrading MLNX-OS® Software.
Be sure to read and follow all of the instructions regarding the updating of the software on your 
system.
The systems do not require Firmware updating. Firmware updating is done through the MLNX-
OS management software. The system comes standard with a management software module for 
system management called Mellanox Operating System (MLNX-OS). MLNX-OS® includes a 
CLI, WebUI, SNMP, system management software, Ethernet protocols and IB management soft-
ware (OpenSM).

3.1.2

Cumulus Linux Software Upgrade 

For Cumulus Linux software upgrade instructions, see 

Upgrading Cumulus Linux

 in the 

Cumu-

lus Linux User Guide

.

The Ethernet ports for remote management connect to Ethernet systems. These sys-
tems must be configured to 100Mb/1Gb auto-negotiation.

Содержание Spectrum SN2410














































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды