Melitta PASSIONE Скачать руководство пользователя страница 47

Страница: 47 / 52

Transport, storage and disposal

Problem

Cause

Action

Although the bean

container is full, the

appliance indicates

that coffee beans must

be filled.

Coffee beans do not

drop into the grinder.

Press a direct key.

Tap lightly on the bean con-

tainer.

Clean the bean container.

Coffee beans are too oily. Use

different coffee beans.

Loud grinder noise.

Foreign objects in the

grinder.

Contact the hotline.

Brewing unit cannot

be inserted after

removing.

Handle for the locking

mechanism of the

brewing unit is not in

the correct position.

Check that the handle for the

locking mechanism is correctly

engaged (see section 7.2 on

page 82).

Drive is not in the

correct position.

Press and hold the "Coffee

strength" button. Also press

the ON/OFF button. The

appliance initialises. Release

buttons again.

Rapid alternate flash-

ing of the displays:

Software problem.

Switch the appliance off and

on again (see section 4.1 on

page 64).

Contact the hotline.

Rapid alternate flash-

ing of the displays:

Brewing unit is not

inserted.

Brewing unit (inner)

The display lights up

without having been

activated:

Appliance is not fully

vented.

Vent the appliance, turn the

rotary regulator clockwise

until it stops for this. As soon

as water flows out of the Cap-

puccinatore, turn the rotary

regulator anti-clockwise until

it stops.

Clean the brewing unit (see

section 7.2 on page 82).

Transport, storage and disposal

9.1 Venting the appliance

We recommend venting the appliance when it is not used for a long period,
prior to transport and when there is a risk of frost.

During venting, residual water is removed from the appliance.

Содержание PASSIONE





















































Результаты поиска

Содержание PASSIONE

Отзывы:

Бренды по названию

Популярные бренды

Melitta PASSIONE, Руководство по эксплуатации

Результаты поиска

Содержание PASSIONE

Отзывы:

Бренды по названию

Популярные бренды