Transport, storage and disposal
96
GB
CAUTION
Hot water and hot steam flowing out of the pipe
Do not reach into the steam that is flowing out.
Do not touch the steam pipe during and immediately after use. Wait
until the steam pipe has cooled down.
Requirement:
The appliance is ready for operation.
1. Place a vessel beneath the Cappuccinatore.
2. Press the "Service" button and also the "Small cup" direct key for longer
than 2 seconds.
»
The display flashes for the duration of the venting.
»
The lighting display indicates that the water tank must be removed.
3. Remove the water tank.
»
The lighted display indicates that the rotary regulator must be actu-
ated.
4. Turn the rotary regulator clockwise up to the stop.
»
Water and steam escape from the Cappuccinatore.
»
The display flashes.
5. As soon as water and steam no longer escape, turn the rotary regulator
anti-clockwise to the stop.
»
The appliance is vented and switches off automatically.
Information
If you put the appliance back into operation, automatic rinsing is carried
out after switching on and the appliance vented (see section 3.5
Switching
on and venting the appliance for the first time
on page 62).
9.2 Transporting the appliance
ATTENTION
Freezing residual water can damage the appliance.
Prevent the appliance from being exposed to temperatures below 0 °C.
Information
Transport the appliance in the original packaging. This avoids damage in
transit.
