29
UK
READ MEMORY
Press “ MEM “ button to inquire memory
average values (AVG).
Average Value Display: the latest 3
groups of memory average values
(Memory values are displayed regardless
of period).
Press “MEM” button, a memory reading
out the latest measurements ,“MEM” for
the buttons (UP). “SET” button for the
memory (DOWN).
Power Measurement closure or after the
end of the state .can press the “MEM”
button read out the latest measurement of
memory.
DELETE MEMORY
The state read out the memory press
the (memory) button five seconds, the
LCD display “nO” has been to delete all
memory.
CARE AND MAINTENANCE
To keep your digital blood pressure moni-
tor in the best condition and protect the
unit from damage, follow the directions
listed below:
Keep the monitor in the storage case
when not in use.
Do not fold the arm cuff too tightly.
The fabric fastener could touch the inner
surface of the arm cuff and damage it.
Clean the monitor and cuff with a soft dry
cloth.
Do not use any abrasive or volatile clean-
ers.
CAUTION
• Do not submerge the device or any of
the components in water.
• Do not subject the monitor to extreme
hot or cold temperatures, humidity or
direct sunlight.
• Store the device and the components
in a clean, safe location.
• Do not subject the monitor to strong
shocks, such as dropping the unit on
the floor.
• Remove the batteries if the unit will
not be used for three months or lon-
ger. Always replace all the batteries
with new ones at the same time.
• This product is designed for use over
an extended period of time; however,
it is generally recommended that it be
inspected and calibrated every two
years to ensure proper function and
performance.
(* Pressure calibration is done by EU
representatives).