Melissa 16670085 Скачать руководство пользователя

Страница: 11 / 16

Step 3 – the sides of the head:

1. Change to one of the shorter guide combs

and trim the sideburns (the hair just in front
of the ears). After this, switch to a longer
guide comb, and continue to cut to the top
of the head.

Step 4 – the top of the head:

1. Use the longest guide comb and trim

the topmost hair, starting from the back
and working your way forward, in the
opposite direction to the actual hair growth.
Sometimes it is necessary to cut the hair the
opposite way.

For a longer cut, use the comb that
accompanies the trimmer to lift the hair on the
top of the head. Then let the trimmer pass over
the comb to cut the hair to the desired length.
You can also use your fingers for this. Always
work from the back forwards. You can cut the
hair shorter by altering the distance from the
scalp to the comb/your fingers. Comb any
loose hair out, and check to see if there are any
uneven sections.

Step 5

Finally, use the trimmer without attaching a
guide comb for a closer cut around the base
and sides of the neck and ears.
To achieve an even cut around the sideburns,
turn the trimmer over. Press the trimmer
gently and steadily against the skin and run it
downwards to achieve a result similar to that of
a razor.

Short cuts

1. Using the longest guide comb, start at the

base of the neck and then work up towards
the crown. Hold the guide comb down flat
against the scalp and work slowly through
the hair.

2. When cutting the sides, use the same

procedure as for the neck.

3. To achieve a ‘flat top’ look, cut the hair on

the top of the head using a comb instead of
a guide comb.

4. Use a shorter guide comb for shorter hair at

the sides and on the neck.
Comb the hair and check to see if there are
any uneven sections.

CLEANING

THE GUARANTEE DOES NOT APPLY

1. If the instructions given above are not

observed.

2. If the device has been mishandled,

subjected to rough treatment or has
suffered any other form of damage.

3. If the device has been subject to

unauthorised repairs.

FOR UNITED KINGDOM ONLY
Plug wiring:

This product is fitted with a BS 1363 5-amp
plug. If you have to replace the fuse, only those
that are ASTA or BSI approved to BS1362 and
with a rated current of 5 amps should be used.
If there is a fuse cover fitted, this cover must be
refitted after changing the fuse. If the fuse cover
is lost or damaged, the plug must not be used.
You must also check if the socket outlets in your
home fit with the plug of the appliance. If the
socket outlet in your home does not fit with the
plug, the plug must be removed and disposed
of safely as insertion of the plug into the socket
is likely to cause electric hazard.
As this product is a class II appliance, the pin of
BS plug for earth connection is false.

INFORMATION ON DISPOSAL OF THIS
PRODUCT

Please note that this Adexi product is marked
with this symbol:

This means that this product must not be
disposed of together with ordinary household
waste, as electrical and electronic waste must
be disposed of separately.
In accordance with the WEEE directive, every
member state must ensure correct collection,
recovery, handling and recycling of electrical
and electronic waste. Private households in
the EU can take used equipment to special
recycling stations free of charge. In some
member states you can, in certain cases, return
the used equipment to the retailer from whom
you purchased it, if you are purchasing new
equipment. Contact your retailer, distributor or
the municipal authorities for further information
on what you should do with electrical and
electronic waste.
Due to the constant development of our
products in terms of function and design,
we reserve the right to make changes to the
product without prior warning.