20
UK
3. Plug cord into a 230 Volt AC outlet.
The power is now on and remain on
while the appliance is plugged in.
4. Press the power switch next to the
power cord On (I). Press down the
“COOK” switch on the front of the
cooker. The indicator illuminates
when the cooking has started. At the
end of the cooking phase, it auto-
matically switches to the “keep warm”
function. After about 20-35 minutes
the rice will be cooked. Gently stir the
rice using the spatula provided. The
rice is now ready to serve.
5. Press the power switch Off (O) and
unplug after each use. Grasp the
plug, not the cord. If the rice is to
be kept warm leave the rice cooker
plugged in. Reposition the lid after
having fluffed the rice.
6. Unplug the rice cooker before remov-
ing lidand rice bowl from the base.
NOTE: Rice may be kept warm for up to
5 hours. To stop the automatic keep warm
cycle, simply unplug from wall outlet.
RICE COOKING CHART:
Standard Measuring Cup Water
For 2 cups of raw rice
2.5 cups
For 4 cups of raw rice
4.5 cups
For 6 cups of raw rice
6.5 cups
For 8 cups of raw rice
8.5 cups
HELPFUL HINTS:
When using the automatic keep warm
cycle, the rice bowl should contain at
least 3 cups ofcooked rice.
CARE AND CLEANING
After each use, wash the rice bowl, the
lid, the measuring cup and the spatula
in warm soapy water. Do not use harsh
detergents, abrasive cleansers or metal
scouring pads. Rinse and dry thoroughly.
Wipe the base with a clean, damp cloth
and dry. NOTE: If the rice sticks to the pot
fill it with hot water with a mild detergent
and let it soak for about 10 minutes.
CAUTION:
1. To reduce the risk of electric shock,
cook only in removable container.
DO NOT IMMERSE THE BASE,
CORD OR PLUG IN WATER OR ANY
OTHER LIQUID.
2. If water should accidentally enter the
switch mechanism or spill onto the
heating plate, carefully unplug the
power cord from the wall outlet. Allow
drying thoroughly before using the
appliance again.
FOR UNITED KINGDOM ONLY
Plug wiring:
This product is fitted with a BS 1363 13-
amp plug. If you have to replace the fuse,
only those that are ASTA or BSI approved
to BS1362 and with a rated current of 13
amps should be used. If there is a fuse
cover fitted, this cover must be refitted
after changing the fuse. If the fuse cover
is lost or damaged, the plug must not be
used. You must also check if the socket
outlets in your home fit with the plug of
the appliance. If the socket outlet in your
home does not fit with the plug, the plug
must be removed and disposed of safely
as insertion of the plug into the socket is
likely to cause electric hazard. A replace-
ment plug should be wired according to
following description.
