GB/IE 13
A
void the risk of death
due to electric shock!
Before use please ensure that the existing
mains voltage is in accordance with the
operating voltage required by the product
(220-240 V).
Check the product and the mains plug for
any damage every time before connecting it
to the mains.
Never use the product if you detect any
damage whatsoever.
The outer lexible cable of the product can-
not be replaced. If the cable is damaged the
product must be disposed of.
Never open one of the electrical operating
parts or stick any kind of object into it.
Protect the mains cord from sharp edges,
mechanical stress and hot surfaces.
Do not attach the product with sharp staples
or nails.
Always unplug the appliance from the power
outlet before assembling, disassembling or
cleaning it.
Never touch the plug of the product or the
product itself with wet hands.
Keep the product away from moisture.
The product must not be connected electri-
cally to any other product.
In the event of an extended period of non-
use (e.g. holidays) disconnect the product
from the mains.
To avoid damage to your eyes, do not look
directly into the beam of light.
If you have questions about the product
or are not sure, seek the advice of an
electrician.
Ä
Application
¤
Unfold the lampshade 1 (igure A).
¤
Feed the cord 4 through the cord stopper
5 (igure C).
¤
Close the cord 4 half way with the cord
stopper 5 (Fig. C).
¤
Feed the LED light 2 into the lamp shade
1 (Fig. C).
¤
Fold the lamp shade 1 and close it with the
cord 4 and the cord stopper 5 (Fig. D).
Please note: Only pull at the cord, not at the
mains cable 3 .
¤
Place the suction cup 7 on a smooth, clean
surface and hang up the illuminated star by
means of the cord 4 .
¤
Connect the power plug 6 to the power
outlet.
¤
The LED light 2 is switched on.
¤
To switch off the LED light 2 , disconnect the
power plug 6 from the power outlet.
Ä
Maintenance and Cleaning
CAUTION! DANGER OF ELECTROCUTION!
Pull the mains plug out of the outlet irst.
CAUTION! DANGER OF ELECTROCUTION!
For reasons of electrical safety, the product must
never be cleaned with water or other liquids or
immersed in water.
Don’t use any benzene or any other solvents.
This would damage the product.
¤
Use only a dry, lint-free cloth to clean the
product.
Содержание 276296
Страница 2: ...A C B 1 1 1 5 4 2 3 1 7 4 5 6 3 D...
