26 GB/IE
Use / Troubleshooting
Assembly / Use
Assembly
Fasten the clips
2
to the branches of your Christmas tree as you
wish. Using the ball joint in the clip
2
you can angle the candles
1
as you wish.
In doing so, be careful that the clip
2
is not unscrewed from the
candle
1
again!
Use
Turn candles
1
on using the
ON
button.
You have to options here:
- If you just press the
ON
button quickly, the candles will shine
constantly.
- If you hold down the
ON
button for approx. 3 seconds, the candles
will flicker.
You can change between constant and flickering modes at any time.
With the
6H
button, you can turn the candles on in a 6 hour mode:
-
Use the
ON
button to turn the candles on either in constant or
flickering mode.
- Then press the
6H
button. The candles will turn themselves off after
6 hours.
Using the +/- button you can increase or decrease the brightness
when candles are in constant mode.
Turn candles off using the
OFF
button.
