Thank you for choosing a Meliconi remote control.
The PRATICO 2 Light remote control is designed to command a TV and a DECODER (satellite or digital terrestrial).
Thanks to the LIGHT
[
]
button, the keyboard lights up, allowing the use of the remote control even in the dark.
The remote control has a permanent memory, so it does not lose its settings even if there are no batteries in it.
The remote control requires 2 new 1.5V
AA/LR06
alkaline batteries, not included in the
package. Insert with the correct polarity as shown in figure.
DO NOT use
rechargeable
batteries.
BATTERIES TEST:
Press and hold the
ON/OFF
[
]
button and check that the indicator light
remains on continuously until the button is released. If the light is off or blinks, the inserted
batteries are low, therefore they need replacement.
Before using the remote control, for each device you wish to control, it is
essential
to set a
specific code
, it matched.
Identify the specific code and set it into the remote control using one of the following ways:
Go to the website listed above, or use the
qr-code
on the side, to access online tool
SEARCH ACTIVATION CODE.
Once you have found the specifi c code for your device, set it in the remote control as
described in the
ENTERING THE CODE DIRECTLY
chapter.
SETTING VIA INTERNET
MANUAL SEARCH
MOBILE (SMS)
INTERNET
ACTIVATION OF REMOTE CONTROL
Do not leave exhausted batteries inserted, as liquid may leak and damage the remote control
INSERTING THE BATTERIES
SAFETY WARNINGS
The remote control must not be exposed to excessive heat sources or fire.
The product
is not a toy
. Keep out of reach of children or domestic animals.
Keep this booklet for future reference
