●
IF THE REMOTE CONTROL IS NEW AND YOU CAN NOT MAKE IT WORK
Check that you have carried out all the settings procedures correctly. If necessary repeat them, following all the steps
indicated carefully.
The code set in the remote control is incorrect for the device that you want to control. Consult the
website to fi nd the correct code for your device. Or try entering all the codes for the same brand shown on the website or
received via SMS one by one and check which one works.
●
IF THE REMOTE CONTROL STOPS WORKING
Make sure that the batteries are new and that the remote control is pointing at the device without any obstacles between
them.
When pressed (even unintentionally) one of the selection buttons, you put the remote control to command that type of device.
Then select the device you wish to control by briefly pressing the corresponding button
(example:
[
TV
]
)
and verify if the
remote control starts over working.
Also try entering the code used to set the remote control again.
●
IF SOME FUNCTIONS ARE NOT AVAILABLE ON THE REMOTE CONTROL
Usually the MELICONI remote control makes available only the present functions on his keyboard, provided they are
available also on the original remote control.
If some of the MAIN functions are not available, you are probably using an incorrect code. Find and set a more suitable code
as described earlier.
Some secondary functions are not present on the MELICONI remote control keypad, to obtained them proceed as described
in chapter
ADDITIONAL FUNCTIONS
.
●
HOW TO CHECK IF THE REMOTE CONTROL SENDS INFRARED SIGNALS
The human eye is not able to detect infrared signals; use a camera (even that of the mobile phone).
Aim the infrared LED located in front of the remote control (not the red LED above) and press and hold on the remote control
the
ON/OFF
[
]
button.
If you see through the camera, the LED light with short white / light blue flashes means that the remote control works and
emits infrared.
website for more detailed information on the product and for the on-line tools to
activate the remote control quickly and easily.
IMPORTANT! When contacting technical support it is INDISPENSABLE that you communicate the BRAND and
MODEL of the device that you want to control and which MELICONI remote control you are using.
To contact an operator to call number
+39 02 66012766
or send an e-mail to:
WARRANTY: 2 year
A
lways keep your sales receipt as proof of the validity of the product’s warranty. The warranty is voided if the product is
tampered with or used improperly.
CUSTOMER SERVICE
ATTENTION!
Most problems are caused by using insufficiently charged batteries.
We recommend checking them and, if necessary, replace them as shown in the
INSERTING THE
BATTERIES
chapter.
TROUBLESHOOTING
