Meler MACRO 200, Инструкция по эксплуатации

Страница: 22 / 92

FOCKE MELER GLUING SOLUTIONS INSTALLATION
3-2
Electrical consumption
In order to install a Macro 200 melter, we should take into consideration
the total consumption of the installation, including the consumption of the
installed hoses and applicators.
Before connecting, make sure that the voltage that is being connected to the
melter is the correct one appearing on the equipment’s characteristics plate.
Connect the machine and check to see if it is well grounded.
Warning: Risk of electrocution. Even when the equipment is turned off,
voltage remains in the intake terminals, which may be dangerous during
internal equipment manipulations.
Install a power switch for disconnecting the melter equipment from the
electrical network. It must be protected against overload and short circuits by
circuit breaker and install appropriate personal protection leads to mass by
differential switch.
Consumption figures, according to melter and output configuration, are
included in the table in the section ‘Electrical power connection’.
Compressed air
As an option, a pneumatically activated by-pass valve or an air drying system
may be installed. If these are added to the system, a dry, unlubricated
compressed air network must be available, with a maximum pressure of 6 bar.
The by-pass valve consumes next to no air, given that this is a pressurized
closed circuit.
Other factors
While installing Macro 200 melters, other practical considerations should be
kept in mind:
• Keep the load opening accessible for comfortable melter filling.
• Position the melter equipment in such a way that you can easily see the
front panel display where temperatures and possible alarm signals are
shown.
Item Description Dimensions
A DOOR OPENED 795 mm
B ELECTRICAL CABINET DISPLACEMENT 410 mm
C UNIT LENGTH 1480 mm
D UNIT LENGTH WITH FREE SPACE TO RIGHT SIDE DEVICES ACCESS 2480 mm
E UNIT HEIGHT 1825 mm
F UNIT WIDTH 875 mm
G UNIT WIDTH WITH FREE SPACE TO REAR SIDE DEVICES ACCESS 1875 mm
- NET WEIGHT 665 Kg
- NET WEIGHT WITH AUTOMATIC ADHESIVE FEEDER 672 Kg