Melchioni Ice Maker, Руководство пользователя

Страница: 15 / 17

5. Ice making cycle begins. The evaporator in the water tray starts to form ice onto
the evaporator fingers.
6. It takes about 6 to 18 mintues(depending on the water temperature) for the ice
making cycle to complete. Once completed, the water tray will tilt forward; the
remaining water will flow back to the water reservoir and the ice cubes will drop
from the fingers. You will hear a sound as the ices cubes are released.Ice are
droped to the ice basket directly
7. In about 30 seconds, the water tray will tilt backward. Once the water tray returns
to its leveled position,the second ice making cycle begins.
8. Press “OFF” to stop the machine.
9. If is on,if still want to make ice,then add water to the water tank, same as
step 2.
Noted: please take out the ice first,then add one full cup of water,
so as to avoid overflow of water when the ice melt.
10. When is on,please pull the drawer out,and take out the ice with the ice
collecting tray.
Notice:For best performance, water temperature should be between 7°C and 35°C
and ambient between 15°C and 38°C.
Care and Cleaning / Maintenance
To ensure the cleanliness of the ice cubes, water in the water reservoir should be
replaced every 24 hours.
Remove the drain plug to drain remaining water from the water reservoir when the
ice maker will not be used for long period of time.
Notice: Screw the drain plug back in place after the water has been drained. If the
cap is lost, please call the distributor.
Always change with fresh water before starting ice production at initial installation or
after long shut-off periods.
Please clean your ice maker regularly. When cleaning, unplug the unit and remove
the ice cubes. Use a diluted solution of water and vinegar to clean the inside and the
outside surface of the ice maker. Do not spray ice maker with chemicals or diluted
agents such as acids, gasoline or oil. Rinse thoroughly before starting.
Trouble Shooting
Problem Possible Cause Suggested Solutions
The compressor
works abnormally
with a Buzzing
noise
The voltage is lower than
recommended
Stop the Ice maker and
do not restart until the
voltage is normal.
“ON”button are
not on
Blown fuse/ No power Replace fuse / Turn
power on