Melchioni Ice Maker, Руководство пользователя

Страница: 13 / 17

Suggestion
：
1. After adding water or taking out of ice, it is better to press the “STOP
then the“START”, the machine will recover faster
2.Please note, if a power failure occur due to disconnection of the power cord, or the
off power button has been pushed off during an ice making cycle, small ice chips may
be formed, this is common, just restarting it, it is ok.
3. Please make sure the water is not over the max water level in the water reservoir.
Safety Notice
In order to avoid any accident, please refer to following operation
：
1.To reduce the risk of fire, electric shock or injury when using the Ice maker, follow
these basic precaution.
2.Plug into ground adapted outlet.
3.Disconnect power before servicing.
4.Do not remove ground prong.
5.Do not use an adapter.
6.Do not use an extension cord.
7.Do not pull directly on wire when plugging or unplugging the unit.
8.If ice is abnormal, please call the seller.
9.It is normal for the compressor and condenser surface to reach temperatures
between 70°C and 90°C during operation and surrounding areas may be very hot.
Please don't touch it.
10.Due to fast freezing, ice cubes may appear “Cloudy”. This is trapped air in the
water and it will not affect quality or taste of ice.
11.Please move the drawer at least 2cm out so as to avoid any metallic components
are rusted.
12.If the supply cord is damaged, it must be replaced by the manufacturer or its
service agent or a similarly qualified person in order to avoid a hazard.
13.This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
14.Children should be supervised to ensure that they do not play with the appliance.
15.WARNING: fill with potable water only.
16.WARNING – Keep ventilation openings, in the appliance enclosure or in the built-
in structure, clear of obstruction.
17.WARNING – Do not use mechanical devices or other means to accelerate the
defrosting process, other than those recommended by the manufacturer.
18.WARNING – Do not damage the refrigerant circuit.